Call2Teams - Customer
Note: Phone App is available as an additional 'add-on' to existing PBX services. If the option is not available in the portal then the service has not been provisioned to the account and needs to be enabled via the licensing provider.
Phone App is currently only available to Call2Teams for PBX users.
Phone App is an add-on to the Call2Teams PBX license that embeds a dialler in Teams for native calling.
The Phone App is automatically loaded into the users Teams environment as a part of the service. There are some limitations to the user experience compared to the full Microsoft ‘Phone System’ calling experience. Since the Phone App does not enable any of Microsoft Teams’ native phone system capabilities (e.g. auto attendant, call queues etc.), customers/users should rely on PBX capabilities provided by their existing phone service to deliver the feature set that a business user would expect.
The Phone App users can be mixed in the same customer organisation that is using the Microsoft Phone System 'Standard User' experience so the customer can choose the capability to assign users as required.
Note: For a user to operate with the Phone App service they must be in Teams only mode. If they are in Skype for Business mode, the Skype 'S' symbol will appear by their name in Teams when being contacted from another organization. If this is showing then the user will not work with Phone App.
Refer to Microsoft documentation for moving users between Skype for Business and Teams modes available here
Also note: Microsoft are changing the name of the Phone System Licence to Teams Phone Licence. Please be aware that references to both may continue to co-exist for a time.
License Requirement for Phone App
Phone App Requires a standard Call2Teams SKU (Call2Teams for PBX or Call2Teams for Trunks) + Call2Teams Phone App SKU. For each configured Phone App user in the portal they will use one of each licences.
Configuring Phone App
The Phone App capability is enabled in the Teams services tab.
Save the configuration after enabling Phone App and Authorize Phone App for my Organization then run a Sync Now process.
Syncing Phone App Users
The previous step will need to be completed before Phone App only users can be Sync'd in. A Sync will need to be performed before and after adding/configuring the users.
Please Note: If you are using Large Tenant Mode then you will need to define an Azure AD Group for Phone App users.
** The Phone App users MUST NOT also be part of the standard Azure AD groups. **
Configuring Microsoft 365 to work with Phone App
Phone App relies upon the service global network to place calls directly to Microsoft Teams users through a method referred to as ‘external access’. External access is managed within the Teams admin center, and a function of this management is to enable calls from the domain used by the service for Phone App ( call2teams.com ).
Microsoft tenants have this capability fully enabled by default but if external access has been restricted then this is managed in the Teams admin center:
Using the Microsoft Teams admin center https://admin.teams.microsoft.com/dashboard
In the left navigation, go to Users > External access.
Turn on the Users can communicate with other Skype for Business and Teams users setting to enable External Access.
If all Teams external organizations are to communicate with the organization, skip the next step; the Microsoft tenant is ready for external access.
If a limit to the organizations that can communicate with users in the organization is needed, either allow all except some domains, or allow only specific domain
- To limit communications to specific organizations, add those domains to the list with a status of Allowed. Once these are added any domain to the Allow list, communications with other organizations will be limited to only those organizations whose domains are in the Allow list.
- Be sure to add the Phone App domain ( call2teams.com ) to the Allow list.
- Click Save.
Phone App also relies on the Microsoft 365 Tenant or User to be in "Teams Only" mode. Depending upon organization requirements, it may be easier to move the entire Microsoft 365 tenant to Teams Only mode, or this can change can be made to an individual user.
Check this setting please follow the Steps in the Screenshot below;
If you have had to Upgrade from Islands to Teams Only Mode you will also need to follow the steps in this KB to upgrade within our platform; Islands Mode/Teams Only Mode
|NOTE: if the Microsoft portal reports the error "We can't upgrade this organization to Teams Only mode" then review this article for temporarily removing domains to complete this process: Islands Mode moving to Teams Only mode|
Upgrade a Single User to Teams Only
If you are only using the Phone App for a few users within your 365 Tenant then you may choose to only set them users to Teams Only Mode. To Do this follow the steps below;
Using the Microsoft Teams admin center
- In the left navigation, go to Users, and then select the user from the list.
- On the Account tab for the user, under Teams upgrade, click Edit.
- You can set the Coexistence mode. Select Teams Only.
- Click Save after you make your changes.
For more information on Teams Only Mode please see; https://docs.microsoft.com/en-us/microsoftteams/teams-only-mode-considerations
Configuring Phone App users
When Phone App is enabled, all users from a connected Microsoft 365 account will be configurable in the Users tab of the portal. The Phone App users will have a different icon identifying them as Phone App users and not Standard users.
|Phone App User|
Select the user from the list and configure SIP credentials or Trunk numbers as for a Standard user.